AC-DC PFC Converter Using Combination of Flyback Converter and Full-bridge DC-DC Converter

  • Moh. Zaenal Efendi Politeknik Elektronika Negeri Surabaya
  • Abdul Rizal Politeknik Elektronika Negeri Surabaya
  • Aldi Erzanuari Politeknik Elektronika Negeri Surabaya
  • Suryono . Politeknik Elektronika Negeri Surabaya
  • Novie Ayub Windarko Politeknik Elektronika Negeri Surabaya

Abstract

This paper presents a combination of power factor correction converter using Flyback converter and Full-bridge dc-dc converter in series connection. Flyback converter is operated in discontinuous conduction mode so that it can serve as a power factor correction converter and meanwhile Full-bridge dc-dc converter is used for dc regulator. This converter system is designed to produce a 86 Volt of output voltage and 2 A of output current. Both simulation and experiment results show that the power factor of this converter achieves up to 0.99 and meets harmonic standard of IEC61000-3-2.

Keywords: Flyback Converter, Full-bridge DC-DC Converter, Power Factor Correction.

Downloads

Download data is not yet available.

References

Arthur W. Kelly, Rectifier Design for Minimum Line-Current Harmonics and Maximum Power Factor, IEEE Transaction on Power Electronics, Vol. 7, No. 2, April, 1992.

Dragan Maksimovic, Robert W. Erickson, Universal input, High Power Factor Boost Doubler Rectifiers, IEEE Applied Power Electronics Conference, 1995.

Seleme Isaac Jr. Seleme, Lenin Martins Ferreira Morais, Arthur Hermano Rezende Rosa, Leonardo Antônio Borges Torres, Stability in Passivity- based BoostConverterController forPower Factor Correction, European Journal of Control, Volume 19, Issue 1, January 2013.

Hisahito Endo, Takashi Yamashita, Toshiyuki Sugiura, A High Power Factor Buck Converter, IEEE Applied Power Electronics Conference, 1992.

J.M. Alonso, M.A. Dalla Costa, C. Ordiz, Integrated Buck-flyback Converter as a High-power-factor Off-line Power Supply, Industrial Electronics IEEE Trans, 55 (3), 2008.

M.C. Ghanem, K. Al-Haddad, G. Roy, A New Single Phase Buck-Boost Converter With Unity Power Factor, In Conference Record of The 1993 IEEE Industry Applications Society Annual Meeting, IAS 1993.

Huai Wei, Power Factor Correction Circuits, Power Electronics Handbook (Third Edition), 2011.

Bor-ren Lin, Tsang-sum Huang, Zero Current SwitchingCukConverter forPower Factor Correction, Electric Power Systems Research, Volume 41, Issue 2, May 1997.

Mohd Rodhi Sahid, Abdul Halim Mohd Yatim, Modeling and Simulation of a New Bridgeless SEPIC Power Factor Correction Circuit, Simulation Modelling Practice and Theory, Volume 19, Issue 2, February 2011.

Schaffner EMC,IEC61000-3-2 Harmonics Standard Overview, May 2006.

Robert W Erickson, M. Madigan, S. Singer, Design of a Simple High Power Factor Rectifier Based on Flyback Converter, IEEE Applied Power Electronics Conference, 1990.

Zhang Jun, D.D.-C. Lu, Sun Ting, Flyback-based Single-stage Power-Factor-correction Scheme with Time-multiplexing Control, Industrial Electronics IEEE Trans, 57 (3), 2010.

Published
2014-06-01
How to Cite
Efendi, M. Z., Rizal, A., Erzanuari, A., ., S., & Windarko, N. A. (2014). AC-DC PFC Converter Using Combination of Flyback Converter and Full-bridge DC-DC Converter. EMITTER International Journal of Engineering Technology, 2(1), 102-110. https://doi.org/10.24003/emitter.v2i1.21
Section
Articles