Performance Analysis of Video Transmission Using Sequential Distortion Minimization Method for Digital Video Broadcasting Terrestrial
AbstractThis paper presents about the transmission of Digital Video Broadcasting system with streaming video resolution 640x480 on different IQ rate and modulation. In the video transmission, distortion often occurs, so the received video has bad quality. Key frames selection algorithm is flexibel on a change of video, but on these methods, the temporal information of a video sequence is omitted. To minimize distortion between the original video and received video, we aimed at adding methodology using sequential distortion minimization algorithm. Its aim was to create a new video, better than original video without significant loss of content between the original video and received video, fixed sequentially. The reliability of video transmission was observed based on a constellation diagram, with the best result on IQ rate 2 Mhz and modulation 8 QAM. The best video transmission was also investigated using SEDIM (Sequential Distortion Minimization Method) and without SEDIM. The experimental result showed that the PSNR (Peak Signal to Noise Ratio) average of video transmission using SEDIM was an increase from 19,855 dB to 48,386 dB and SSIM (Structural Similarity) average increase 10,49%. The experimental results and comparison of proposed method obtained a good performance. USRP board was used as RF front-end on 2,2 GHz.
ETSI EN,Digital Video Broadcasting Frame Structure and Modulation,EBU-UER, 2009,France.
Fischer W,â€Digital and Audio Broadcasting Technologyâ€, Rohde & Schwarz GmbH & Co.KG, Muchen, 2010
ETSI EN 300 744 V1.5.1 (2004-11). â€œDigital Video Broadcasting (DVB); Framing structure, channel coding and modulation for digital terrestrial televisionâ€.ETSI, 11/2004
Panagiotakis Contas, Ovsepian Nelly, Michael Elena, "Video Synopsis Based on Sequential Distortion Minimization Method",Computer Science,University of Crete, 2013
Tommasi Franco, De Luca Valerio, Melle Catiuscia, "Packet losses and objective video quality metrics in H.264 video streaming", University of Salento, Italy, 2014
Berjon-Eriz G, Eizmendi I, Velez M, Prieto G, Correia S, Arrinda A, Angueira P,"Laboratory Test for testing DVB-T2 mobile performance", University of Basque Country, Spain, 2010.
Panagiotakis Costas,oulais Anastasios, Tziritas Gergios "Equivalent Key Frames Selecion Based on Iso Content Distance and Iso Distortion Principle", Greece, 2003
Briantoro Hendy, Astawa I Gede Puja, Sudarsono Amang, "An Implementation of Error Minimization Data Transmission in OFDM using Modified Convolutional Code", Politeknik Elektronika Negeri Surabaya, Indonesia, 2015
OFDM Simulation Using Matlab http:// www.ece.gatech.edu / research /labs /sarl /tutorials/ OFDM/Tutorial_web.pdf
A. Zainudin, A. Sudarsono, I. G. P. Astawa,â€Performance Analysis of an OFDM PHY Scheme with Zero Forcing Equalizer Using Software Defined Radio Platform and USRPâ€,EMITTER International Journal of Engineering Technology Vol. 1, No. 2, ISSN: 2355-391X, EEPIS, Surabaya, Indonesia,June 2014
Sudipta Ghoss, Ankit Bass, "Implementation of DVB-T using OFDM on Phisical Sub Layer" India.
John Biggeni, "DVB T/T2 Fundamentals", Malaysia.
Arfianto Teguh,"Optimasi parameter transmisi OFDM untuk DVB-T pada penerimaan tetap dan bergerak" Universitas Mercu Buana
Nuaymi Loutfi, â€œWIMAX Technology for Broadband Wireless Accesâ€ John Wiley & Sons Ltd, England, 2007
Diego A Sano "A performance study of DVB-T2 and DVB-T2-Lite for mobile reception" 2014
Athinarayanan Vallavaraj "The Effects Of Convolutional Coding On Ber Performance Of Companded Ofdm Signals", 2005
Dedi Usman Effendy "Analisis Unjuk Kerja Sistem Digital Video Broadcast (DVB)", 2009
P. Goudarzi, M.Hosseinpour " QoE enhancement for video transmission over MANETs using distortion minimization ", 2010
Dosselman Richard, Yang Xue Dong " A comprehensive assesment of the structural similarty index ", Springer-Verlag London, 2009
The copyright to this article is transferred to Politeknik Elektronika Negeri Surabaya(PENS) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to PENS. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment. The copyright transfer form can be downloaded here .
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
- Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
- Authors may reproduce or authorize others to reproduce the work or derivative works for the author’s personal use or company use, provided that the source and the copyright notice of Politeknik Elektronika Negeri Surabaya (PENS) publisher are indicated.
- Authors are allowed to use and reuse their articles under the same CC-BY-NC-SA license as third parties.
- Third-parties are allowed to share and adapt the publication work for all non-commercial purposes and if they remix, transform, or build upon the material, they must distribute under the same license as the original.
To avoid plagiarism activities, the manuscript will be checked twice by the Editorial Board of the EMITTER International Journal of Engineering Technology (EMITTER Journal) using iThenticate Plagiarism Checker and the CrossCheck plagiarism screening service. The similarity score of a manuscript has should be less than 25%. The manuscript that plagiarizes another author’s work or author's own will be rejected by EMITTER Journal.
Authors are expected to comply with EMITTER Journal's plagiarism rules by downloading and signing the plagiarism declaration form here and resubmitting the form, along with the copyright transfer form via online submission.