An Empirical Research on Pilgrims Wayfinding Satisfaction Study: A Consideration for Improving Wayfinding Experience in Al Masjid Al Haram
Abstract
Millions of Muslims visit Makkah Al-Mukarramah every year for Hajj and Umrah. It is a mandatory part of both Hajj and Umrah rituals to visit Al Masjid Al Haram for various activities. Huge crowds and lack of prominent wayfinding signs make Hajis spend more time inside Haram trying to find their way that too in a tense and panicky state of mind. This paper aims at assessing the gravity of wayfinding associated challenges faced by Hajis by applying the well-known Customer Satisfaction Model and proposing possible solutions to minimize potential adverse effects. Convenience sampling was used to collect the data from the proposed sample size of 2000 from various nationalities and regions. A total of 618 responses were received. The structural equation modeling (SEM) method was used for path analysis using AMOS 21 analytical tool and results revealed a reasonable fit between data collected and the model used: chi2 (485.95), chi2 / DF (3.77), RMSEA (0.07), CFI (0.92), and all values of Cronbach's alpha are greater than 0.78. The results substantiated that Hajis face problems in wayfinding inside Haram, which leads to Hajis finding it challenging to navigate in the Haram area. When the respondents were presented with alternative solutions to improve their wayfinding inside Haram, the results showed a statistically significant improvement in the satisfaction level.
Downloads
References
Ministry of Foreign Affairs, Custodian of the Tow Holy Mosques Expansion, 2017. [Online]. Available: http://embassies.mofa.gov.sa/sites/NewZealand/AR/AboutKingdom/KingdomAchievments/Pages/default.aspx.
Wikipedia, List of largest buildings, 2017. [Online]. Available: https://en.wikipedia.org/wiki/List_of_largest_buildings.
Telegraph, The world’s 20 most expensive buildings, Telegraph, 2016. [Online]. Available: https://www.telegraph.co.uk/travel/lists/the-worlds-most-expensive-buildings/masjid-al-haram-mecca-saudi-arabia/.
T. S. Committee, The 19th Scientific Forum of Hajj, Umrah and Madinah Visit Research, in The 19th Scientific Forum of Hajj, Umrah and Madinah Visit Research, 2019.
Saudi Vision 2030, 2016. [Online]. Available: https://www.vision2030.gov.sa/download/file/fid/422. [Accessed: 03-Dec-2019].
M. Mӧhlmann, Collaborative consumption: Determinants of satisfaction and the likelihood of using a sharing economy option again, J. Consum. Behav., vol. 14, no. 3, pp. 193–207, 2015. DOI: https://doi.org/10.1002/cb.1512
I. Confente, Twenty-five years of word-of-mouth studies: A critical review of tourism research, Int. J. Tour. Res., vol. 17, pp. 613–624, 2015. DOI: https://doi.org/10.1002/jtr.2029
L. Sharma, G., & Baoku, Customer satisfaction in Web 2.0 and information technology development, Inf. Technol. People, vol. 53, pp. 140–147, 2016.
E. Marinao, Mobilities, Tourism and Travel Behavior - Contexts and Boundaries, in Mobilities, Tourism and Travel Behavior - Contexts and Boundaries, 2018.
C. H. Jones, E. and Tang, Tourism SMEs, Service Quality and Destination, London CABI, pp. 15–60, 2005. DOI: https://doi.org/10.1079/9780851990118.0000
T.-Y. Lin, W.-H. Chang, and M.-S. Chen, The International Journal of Organizational Innovation, Int. J. Organ. Innov., vol. 13, no. 1, pp. 165–177, 2020.
M. C. Wang, Y., & Davidson, Chinese holiday makers’ expenditure: Implications for marketing and management, J. Hosp. Mark. Manag., vol. 19, no. 4, pp. 373–396, 2010. DOI: https://doi.org/10.1080/19368621003667101
M. Yu, L., & Goulden, A comparative analysis of international tourists’ satisfaction in Mongolia, Tour. Manag., vol. 27, no. 6, pp. 1331–1342, 2006.
R. A. L. Rousan, H. Ibraheim, M. Bader, and N. Khasawneh, Sustainable tourism development in Jordan. Measuring customer satisfaction of american tourists visiting petra and mount nebo in Jordan, J. Environ. Manag. Tour., vol. 11, no. 4, pp. 1001–1012, 2020, doi: 10.14505/jemt.v11.4(44).26.
S. Jefferson, L. Jhohana, and C. Danilo, The Augmented reality and virtual reality as a tool to create tourist experiences, Iber. J. Inf. Syst. Technol., pp. 87–96, 2020.
V. Navajas-Romero, R. D. Hernández-Rojas, A. Hidalgo-Fernández, and J. A. Jimber Del Rio, Tourist loyalty and mosque tourism: The case of the Mosque-Cathedral in Córdoba (Spain), PLoS One, vol. 15, no. 12, p. e0242866, 2020, doi: 10.1371/journal.pone.0242866. DOI: https://doi.org/10.1371/journal.pone.0242866
U. Dogu and F. Erkip, Spatial factors affecting wayfinding and orientation: A case study in a shopping mall, Environ. Behav., vol. 32, no. 6, pp. 731–755, 2000, doi: 10.1177/00139160021972775. DOI: https://doi.org/10.1177/00139160021972775
R. Passini, Wayfinding in Architecture. New York: Van Nostrand Rienhold, 1984.
R. Arthur, P., Passini, Wayfinding: People, signs and architecture. New York: McGraw-Hill, 1992.
F. Hamhoum and C. Kray, Supporting pilgrims in navigating densely crowded religious sites. London: Springer-Verlag, 2011. DOI: https://doi.org/10.1007/s00779-011-0461-6
O. Almoaid, Hajj crowd management via a mobile augmented reality application: a case of The Hajj event, Saudi Arabia, University of Glasgow, 2015.
A. Basnawi, Signage Marks in the Holy Mosque of Makkah: Analytical Study, Umm Al-Qura University, 2008.
M. J. O’ Neill, Effects of signage and floor plan configuration on wayfinding accuracy, Environ. Behav., vol. 23, pp. 555–590, 1991. DOI: https://doi.org/10.1177/0013916591235002
A. A. Bindajam and J. Mallick, Impact of the spatial configuration of streets networks on urban growth: A case study of Abha City, Saudi Arabia, Sustain., vol. 12, no. 5, pp. 1–14, 2020, doi: 10.3390/su12051856. DOI: https://doi.org/10.3390/su12051856
B. Anbaroğlu, İ. B. Coşkun, and H. H. Gürler, WHICH WAY IS ‘ YILDIZ AMF İ ’ ? AUGMENTED REALITY VS . PAPER MAP ON PEDESTRIAN WAYFINDING, vol. XLIV, no. October, pp. 7–8, 2020.
Y. K. Peponis, J., Zimring, C.,&Choi, Finding the building in wayfinding, Environ. Behav., vol. 22, pp. 555–590, 1990. DOI: https://doi.org/10.1177/0013916590225001
K. Lynch, The image of the city. Cambridge, MA: Harvard University Press, 1960.
W. Chen, Historical Oslo on a handheld device–a mobile augmented reality application, Procedia Comput Sci, vol. 35, pp. 979–985, 2014. DOI: https://doi.org/10.1016/j.procs.2014.08.180
C. D. Kourouthanassis P, Boletsis C, Bardaki C, Tourists responses to mobile augmented reality travel guides: the role of emotions on adoption behavior, Pervasive Mob Comput, vol. 18, pp. 71–87, 2015. DOI: https://doi.org/10.1016/j.pmcj.2014.08.009
T. H. Jung, H. Lee, N. Chung, and M. C. tom Dieck, Cross-cultural differences in adopting mobile augmented reality at cultural heritage tourism sites, Int. J. Contemp. Hosp. Manag., vol. 30, no. 3, pp. 1621–1645, 2018, doi: 10.1108/IJCHM-02-2017-0084. DOI: https://doi.org/10.1108/IJCHM-02-2017-0084
I. ADASCALITEI and I.-C.-M. BALTOI, The Influence of Augmented Reality in Construction and Integration into Smart City, Inform. Econ., vol. 22, no. 2/2018, pp. 55–67, 2018, doi: 10.12948/issn14531305/22.2.2018.06. DOI: https://doi.org/10.12948/issn14531305/22.2.2018.06
A. Devereaux, The augmented commons: How augmented reality aids agile self-organization, J. Priv. Enterp., vol. 34, no. 2, pp. 81–101, 2019, doi: 10.2139/ssrn.2956718. DOI: https://doi.org/10.2139/ssrn.2956718
S. G. Fussell and D. Truong, Preliminary results of a study investigating aviation student’s intentions to use virtual reality for flight training, Int. J. Aviat. Aeronaut. Aerosp., vol. 7, no. 3, 2020.
C. K. H. Lau, C. F. R. Chui, and N. Au, Examination of the adoption of augmented reality: a VAM approach, Asia Pacific J. Tour. Res., vol. 24, no. 10, pp. 1005–1020, 2019, doi: 10.1080/10941665.2019.1655076. DOI: https://doi.org/10.1080/10941665.2019.1655076
S. Ahmed, A Review on Using Opportunities of Augmented Reality and Virtual Reality in Construction Project Management, Organ. Technol. Manag. Constr. an Int. J., vol. 11, no. 1, pp. 1839–1852, 2019, doi: 10.2478/otmcj-2018-0012. DOI: https://doi.org/10.2478/otmcj-2018-0012
T. A. Emmanouilidis C, Koutsiamanis RA, Mobile guides: taxonomy of architectures, context awareness, technologies and applications, J Netw Comput Appl, vol. 36, no. 1, pp. 103–125, 2013. DOI: https://doi.org/10.1016/j.jnca.2012.04.007
G. C. Yovcheva Z, Buhalis D, Engineering augmented tourism experiences. Berlin: Springer, 2013. DOI: https://doi.org/10.1007/978-3-642-36309-2_3
J. Y. Chung N, Han H, Tourists’ intention to visit destination: role of augmented reality applications for heritage site, Comput. Human Behav., vol. 50, no. C, pp. 588–599, 2015. DOI: https://doi.org/10.1016/j.chb.2015.02.068
K. Olsson, T., Lagerstam, E., Kärkkäinen, T., and Väänänen-Vainio-Mattila, Expected user experience of mobile augmented reality services: a user study in the context of shopping centres, Pers. Ubiquitous Comput., vol. 17, no. 2, pp. 287–304, 2013. DOI: https://doi.org/10.1007/s00779-011-0494-x
A. Han, D.I., Jung, T. and Gibson, Dublin AR: implementing augmented reality in tourism, in Information and Communication Technologies in Tourism, I. Xiang, Z. and Tussyadiah, Ed. Vienna: Springer, 2014, pp. 511–523.
C. Fornell, M. D. Johnson, E. W. Anderson, J. Cha, and B. E. Bryant, The American Customer Satisfaction Index: Nature, purpose, and findings, J. Mark., vol. 60, no. 4, pp. 7–18, 1996, doi: 10.2307/1251898. DOI: https://doi.org/10.2307/1251898
C. F. Chen CF, Experience quality, perceived value, satisfaction and behavioral intentions for heritage tourists, Tour. Manag., vol. 31, no. 1, pp. 29–35, 2010. DOI: https://doi.org/10.1016/j.tourman.2009.02.008
P. M. D. Stevens P, Knutson B, A tool for measuring service quality in restaurants, Cornell Hotel Restaur. Adm. Q., vol. 36, no. 2, pp. 56–60, 1995. DOI: https://doi.org/10.1177/001088049503600226
M. Yoon, Y. and Uysal, An examination of the effects of motivation and satisfaction on destination loyalty: A structural model, Tour. Manag., vol. 26, no. 1, pp. 45–56, 2005. DOI: https://doi.org/10.1016/j.tourman.2003.08.016
C. E. Sa DM, Mobile augmented reality: exploring design and prototyping techniques, MobileHCI, pp. 221–230, 2012. DOI: https://doi.org/10.1145/2371574.2371608
Copyright (c) 2020 EMITTER International Journal of Engineering Technology
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The copyright to this article is transferred to Politeknik Elektronika Negeri Surabaya(PENS) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to PENS. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment. The copyright transfer form can be downloaded here .
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
- Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
- Authors may reproduce or authorize others to reproduce the work or derivative works for the author’s personal use or company use, provided that the source and the copyright notice of Politeknik Elektronika Negeri Surabaya (PENS) publisher are indicated.
- Authors are allowed to use and reuse their articles under the same CC-BY-NC-SA license as third parties.
- Third-parties are allowed to share and adapt the publication work for all non-commercial purposes and if they remix, transform, or build upon the material, they must distribute under the same license as the original.
Plagiarism Check
To avoid plagiarism activities, the manuscript will be checked twice by the Editorial Board of the EMITTER International Journal of Engineering Technology (EMITTER Journal) using iThenticate Plagiarism Checker and the CrossCheck plagiarism screening service. The similarity score of a manuscript has should be less than 25%. The manuscript that plagiarizes another author’s work or author's own will be rejected by EMITTER Journal.
Authors are expected to comply with EMITTER Journal's plagiarism rules by downloading and signing the plagiarism declaration form here and resubmitting the form, along with the copyright transfer form via online submission.
